2- POCKETWIZARD FLEX TT5 TRANSCEIVERS FOR CANON Control TL Hyper/High Speed Sync

Description

2x-POCKETWIZARD FLEXTT5 TRANSCEIVERS FOR CANON Control TL & Hyper/High Speed Sync. Shipped with USPS Priority Mail.
This auction is for 2 Flex TTL5 Transceivers.
I purchased these but never ended up using them. I quit doing the type of photography before I got a chance to use them. There are two identical units. Both are 'Like New' still in their original box. They originally cost 9 each. These are Transceivers, so they can work both as a transmitter and receiver. They have a usb port for firmware upgrades.
The price is for both Transceivers. I bought 2, so I could use one as a transmitter and one as a receiver. Using one as a transmitter meant they both used the same batteries and had the same functions.
The Flex TT5 Transceivers allow complete communication between the camera and flash. They operate the same as if they were attached by a cord. All TTL and sync information is transmitted between the flash and the camera. They can also be used with a regular flash and sync cord to wirelessly sync the flash with the camera.
I'm including free shipping to the purchaser.
________________
The dedicated FlexTT5™ Transceiver, with its built in hot-shoe and ControlTL™ firmware, is the perfect addition to Canon E-TTL II flash systems.  The FlexTT5 takes the existing benefits of Canon wireless systems beyond the boundaries of infrared technology.  When paired with the Mini TT1™ Transmitter or another FlexTT5 Transceiver, a whole new world of wireless flash freedom opens up.  The FlexTT5 is also the perfect Transceiver for your manual triggering needs and works with all MultiMAX channels and many of the MultiMAX advanced functions.
The FlexTT5’s simple design comes to life through its hot-shoe connection with a camera or flash.  Mount a flash or command unit on the FlexTT5 to use the same zone controls and ratio commands as you would normally.   The system tracks your changes in ISO, shutter speed and aperture and reacts accordingly to make sure exposures stay right on target.   Use the flash compensation dial on your camera or flash just as you would normally and the changes pass seamlessly through the system.
The FlexTT5 has two channel configuration settings; C1 and C2.  Each can be programmed as needed with up to 20 ControlTL channels for TTL photography, or 32 standard channels for manual flash photography.  The FlexTT5 Transceiver also has a three-zone selector switch for ease of use with Canon zones and ratios.
With PocketWizard HyperSync™ Technology, the FlexTT5 can precisely advance the timing of your flash trigger so that increased flash sync speeds, up to 1/500th of a second is achievable with many strobes.
Need more speed?  Push your ControlTL system beyond 1/500th and go into FP/High-Speed sync mode automatically.  Simply change your shutter speed to get flash sync all the way to 1/8000th.   No buttons to press or settings to change!
A PocketWizard Utility program is provided to support the FlexTT5 Transceiver via a USB port.  The Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers as well as update your product to the latest firmware.
The FlexTT5 also has our Auto-Sensing Transceiver Technology that enables it to switch back and forth between Transmitter and Receiver modes as needed for greater flexibility on the job. When a hot-shoe or other trigger is detected, it automatically switches to Transmitter mode.   With Auto Relay Mode you can easily trigger a remote camera in sync with remote flash.  Put a camera where you can’t be and use remote TTL or non-TTL lighting at the same time.  Expand your coverage and increase your creativity.