NXC-REL10 (FG2020)- AMX NetLinx Control Card

Description

NetLinx Control Cards can be installed in either the NXF CardFrame, NI-4000, or NetModules. This
document provides basic specifications and wiring information for the NetLinx Control cards.
The NXC-REL10 Relay Control Card provides ten relays supporting devices that employ simple momentary or latching contact-closure control, with LED feedback.
NXC-REL10 Channel Assignments: Channels 1-10 represent relays 1-10.
NXC-REL10 Connections/Wiring: The NXC-REL10 Control Card has 10 relays that are independently controlled and electrically isolated. The relay contacts are rated for a maximum of 1A @ 0-24VAC or 0-28VDC (resistive).
Jumpers located on the Card allow you to select Normally Open (NO) or Normally Closed (NC) contact settings.
Specifications
Power Requirements: 260 mA @ 12 VDC (maximum)
Operation: Relays 1-10: ten relays, 1A @, 24VAC / 28VDC
LEDs: 10 red LEDs light to show ON status activity for each relay.
Wiring:
• Two 10-pin 3.5 mm captive-screw terminals
• Commoning strip (metal)