-40%

PocketWizard Flex TT5 for Canon

$ 52.79

Availability: 100 in stock
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Brand: PocketWizard
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money Back
  • Condition: Excellent condition, showing little signs of use. Includes original box, AA batteries, USB cord, and Quick Guide.
  • Item must be returned within: 30 Days
  • MPN: PW-FLEX-C

    Description

    The PocketWizard FlexTT5 is an auto-sensing transceiver which can act as both a transmitter and receiver. It knows when to transmit and when to receive. This Flex TT5 is designed for the Canon ETTL System.
    TTL Compatibility:
    Canon E-TTL II
    Frequency:
    FCC/IC model: 340.00-354.00 MHz North America
    CE model: 433.44-434.42 MHz EU/Asia/Other
    Channels:
    52 Channels over 26 Frequencies (FCC/IC)
    35 Channels over 5 Frequencies (CE)
    Antenna:
    2.7" (6.9 cm) rubberized with 180 degree swing
    Transmit output power:
    Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
    Range Performance:
    Up to 10 to 240 meters (30 to 800 feet for E-TTL triggering.  Up to 10 to 365 meters (30 to 1200 feet) for basic triggering. Range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference.
    Mounting:
    Hot Shoe, 1/4-20, lanyard, velcro
    Maximum Shooting Rate:  Frames per second (fps)
    8 fps for E-TTL II and normal triggering
    Power: / Channel Switch
    OFF - C.2 - C.1
    Zone Select Switch:
    A-B-C (matches Canon slave groups)
    Status Indicator
    LED: Green, Amber, Red status indications
    Camera / P1 Port:
    1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
    Tip = Trigger
    Ring = Pre-Trigger
    Sleeve = Ground
    Flash / P2 Port:
    1/8" (3.5 mm) mono miniphone.  Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
    Minimum Receive Contact Time:
    Camera / P1 Port = 80 milliseconds
    Flash / P2 Port = 500us
    Voltage Present:
    3.3 VDC (all pins) - safe for all cameras
    Hot Shoe voltage protection:
    Hot Shoe: up to 50V
    USB:
    USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
    Operating Temperature:
    Above -15° C (5° F) and below 50° C (120° F).
    Power:
    Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
    Battery Life:
    60 + Hours
    Dimensions:
    3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered
    Weight:
    5.4 oz (153 grams) 3.8 oz (108 grams) without batteries