-40%
PocketWizard FlexTT5 Transceiver Radio Slave Canon DSLR E-TTL II System (FCC/US)
PocketWizard FlexTT5 Transceiver Radio Slave Canon DSLR E-TTL II System (FCC/US)
PocketWizard FlexTT5 Transceiver Radio Slave Canon DSLR E-TTL II System (FCC/US)

PocketWizard FlexTT5 Transceiver Radio Slave Canon DSLR E-TTL II System (FCC/US)

$ 62.83

Availability: 100 in stock
  • Model: FlexTT5
  • Type: Radio Slaves
  • Condition: 3 Years Warranty from PocketWizard USA. Item was used as a demo unit in the photographic show for short period of time.
  • Refund will be given as: Money back or replacement (buyer's choice)
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days
  • MPN: 801-143
  • Restocking Fee: 20%
  • Brand: PocketWizard

    Description

    Very Good!!!
    Authorized USA Dealer
    Three Years Pocketwizard USA Warranty!!!
    PocketWizard
    FlexTT5 Transceiver Radio Slave
    for Canon DSLR
    (FCC/US/IC:340.00 - 354.00 MHz)
    Condition: Very Good
    Item was used as a demo unit in the photographic show for a short period of time. It is in good working order and comes with full 3 years warranty from Pocketwizard USA. Physically, it shows some sign of minor wear.
    This purchase Includes:
    (1) PocketWizard FlexTT5 Transceiver
    (2) USB Cable
    (3) Two (2) AA Batteries
    (4) Quick Guide
    Specifications
    TTL Compatibility:
    Canon E-TTL II
    Frequency:
    FCC/IC model: 340.00-354.00 MHz North America
    Channels:
    52 Channels over 26 Frequencies (FCC/IC)
    Antenna:
    2.7" (6.9 cm) rubberized with 180 degree swing
    Transmit output power:
    Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
    Range Performance:
    Up to 10 to 240 meters (30 to 800 feet for E-TTL triggering.  Up to 10 to 365 meters (30 to 1200 feet) for basic triggering. Range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference.
    Mounting:
    Hot Shoe, 1/4-20, lanyard, velcro
    Maximum Shooting Rate  Frames per second (fps)
    8 fps for E-TTL II and normal triggering
    Power / Channel Switch
    OFF - C.2 - C.1
    Zone Select Switch
    A-B-C (matches Canon slave groups)
    Status Indicator
    LED: Green, Amber, Red status indications
    Camera / P1 Port
    1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering.  Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
    Tip = Trigger
    Ring = Pre-Trigger
    Sleeve = Ground
    Flash / P2 Port
    1/8" (3.5 mm) mono miniphone.  Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
    Minimum Receive Contact Time
    Camera / P1 Port = 80 milliseconds
    Flash / P2 Port = 500us
    Voltage Present
    3.3 VDC (all pins) - safe for all cameras
    Hot Shoe voltage protection:
    Hot Shoe: up to 50V
    USB:
    USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
    Operating Temperature
    Above -15° C (5° F) and below 50° C (120° F).
    Storage Temperature (without battery)
    Above -30 C (-22 F) and below 85 C (185 F)
    Construction
    High impact plastic, captive battery door
    Hot Shoe made of glass reinforced resin
    Power
    Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
    Battery Life
    60 + Hours
    Dimensions
    3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered
    Weight
    5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
    Included in the box
    FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide
    ROHS Compliant
    -- Free Standard Mail For US Buyers
    -- .00 for USPS Priority Express Mail.
    If you have any question about the item please feel free to contact us.
    Thanks,
    VL Camera