Starter For Honda Accord 2.3L 1998-2002 & Acura CL 1998-1999 SM442-03 410-54026

Description

Unit Type: Starter
Voltage: 12
Rotation: CW
Teeth: 9
KW: 1.6
Starter Type: PMGR
Brief: ACURA CL and HONDA ACCORD 1998-00
HONDA ODYSSEY, ISUZU OASIS 1998-99
ACURA: 31200-PAA-A02
ARROWHEAD: SMU0005
CARGO: 113398
HONDA: 31200-PAA-A02, PCB0X
ISUZU: 5862061680
J & N: 410-54026
LESTER: 17729
MITSUBA: SM442-02, SM442-03
NSA: STR-3606
WAI: 2-1940-MT
Please  verify that this is the right part number you  need  before ordering.
Starter For Honda Accord 2.3L 1998-2002 & Acura CL 1998-1999 SM442-03 410-54026
Unit Type: Starter
Voltage: 12
Rotation: CW
Teeth: 9
KW: 1.6
Starter Type: PMGR
Brief: ACURA CL and HONDA ACCORD 1998-00
HONDA ODYSSEY, ISUZU OASIS 1998-99
ACURA: 31200-PAA-A02
ARROWHEAD: SMU0005
CARGO: 113398
HONDA: 31200-PAA-A02, PCB0X
ISUZU: 5862061680
J & N: 410-54026
LESTER: 17729
MITSUBA: SM442-02, SM442-03
NSA: STR-3606
WAI: 2-1940-MT
Please  verify that this is the right part number
you  need
before ordering.
MAKE
TYPE
MODEL
YEAR
ENGINE
ACURA
Auto and Light Truck
CL
1998
2.3L
ACURA
Auto and Light Truck
CL
1999
2.3L
HONDA
Auto and Light Truck
ACCORD
1998
2.3L
HONDA
Auto and Light Truck
ACCORD
1999
2.3L
HONDA
Auto and Light Truck
ACCORD
2000
2.3L
HONDA
Auto and Light Truck
ACCORD
2001
2.3L
HONDA
Auto and Light Truck
ACCORD
2002
2.3L
HONDA
Auto and Light Truck
ODYSSEY
1998
2.3L
ISUZU
Auto and Light Truck
OASIS
1998
2.3L
ISUZU
Auto and Light Truck
OASIS
1999
2.3L
Starter (engine):
A starter (also self-starter, cranking motor, or starter motor) is a device used to rotate (crank) an internal-combustion engine so as to initiate the engine's operation under its own power. Starters can be electric, pneumatic, or hydraulic. In the case of very large engines, the starter can even be another internal-combustion engine.
Internal combustion engines are feedback systems, which, once started, rely on the inertia from each cycle to initiate the next cycle. In a four-stroke engine, the third stroke releases energy from the fuel, powering the fourth (exhaust) stroke and also the first two (intake, compression) strokes of the next cycle, as well as powering the engine's external load. To start the first cycle at the beginning of any particular session, the first two strokes must be powered in some other way than from the engine itself. The starter motor is used for this purpose and it is not required once the engine starts running and its feedback loop becomes self-sustaining.
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. n this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.
Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.
Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2)
.I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3)
.What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4)
.What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5)
.If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
(6)What causes a starter to go bad?
CAUSES OF FAULTY STARTERS: CAUSE OF FAILURE
Electrical connections faulty. Solenoid switch (engaging relay) stiff or faulty. Electric motor damaged electrically. Single-pinion gear, starter pinion or freewheel damaged.
Item Specifics
Brand
Autoparts-leader
Manufacturer Part Number
AP05371301L
Other Part Number
31200-PAA-A02 PCB0X 5862061680 31200-PAA-A02 SMU0005 113398
Interchange Part Number1
SM442-02 SM442-03 STR-3606 2-1940-MT 410-54026 17729
Interchange Part Number2
17729A 31200-PAA-A02A 5862061680A SM442-02A SR107117A
Interchange Part Number3
2-1940-MTA 410-54026A SMU0005A PCB0X SM442-03A 113398A
Compatibility
Starter For ACURA CL and HONDA ACCORD
Warranty
1 Year
Fitment Type
Direct Replacement
Condition
New
Surface Finish
New Quality
Voltage
12
Rotation
CW
Teeth
9
KW
1.6
Starter Type
PMGR
Part Type
Starter
Weight
3.55kg
Package
24.00(L) * 16.00(W) * 12.00(H)
Number of Pieces
1
Non-Domestic Product
No
Custom Bundle
No
Modified Item
No
Item Specifics
Brand
Autoparts-leader
Manufacturer Part Number
AP05371301L
Other Part Number
31200-PAA-A02 PCB0X 5862061680 31200-PAA-A02 SMU0005 113398
Interchange Part Number1
SM442-02 SM442-03 STR-3606 2-1940-MT 410-54026 17729
Interchange Part Number2
17729A 31200-PAA-A02A 5862061680A SM442-02A SR107117A
Interchange Part Number3
2-1940-MTA 410-54026A SMU0005A PCB0X SM442-03A 113398A
Compatibility
Starter For ACURA CL and HONDA ACCORD
Warranty
1 Year
Fitment Type
Direct Replacement
Condition
New
Surface Finish
New Quality
Voltage
12
Rotation
CW
Teeth
9
KW
1.6
Starter Type
PMGR
Part Type
Starter
Weight
3.55kg
Package
24.00(L) * 16.00(W) * 12.00(H)
Number of Pieces
1
Non-Domestic Product
No
Custom Bundle
No
Modified Item
No
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. The images shown are not the actual item and are for your reference only.
4. Fast shipping:All our packages use USPS First Class/UPS/Fedex.... Package Service
5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
STORE HOME
ABOUT US
FEEDBACK
SHIPPING
PAYMENT
New List Item
✅Power LH Driver Side Exterior Mirror For 2009-2010 Subaru Forester
USD 60.76
For 2009-2014 Ford F-150 Bug Shield Hood Deflector Bugflector Upgrade
USD 84.49
Smoke Black Side Wind Deflectors Window Visor 4p For 09-21 Ram 1500 Extended Cab
USD 28.79
✅Big Mirror Plate Heated Truck For 2002-18 International Prostar&Lonestar
USD 32.69
Smoke Black Side Wind Deflectors Window Visors 4p For 99-11 Ford Ranger Crew Cab
USD 34.49
Hot Item
Starter For Chevy 2.2L S10 02 03 Monte Carlo 3.4L Venture Impala 2001-05 SDR0189
USD 46.49
2 Front Hood Gas Lift Supports Shock Struts Props For Ford Explorer 2002 to 2010
USD 14.99
New Starter For Ford Mercury Crown Victoria Lincoln Mark Series 4.6L SFD0028
USD 45.44
Starter for Ford F150 4.6 5.4 1999-2010 F250 1999-2009 6646 SFD0024 6C3T-11000BA
USD 52.46
Starter For Polaris & Drive 300 Big Boss 250 Scrambler Sportsman 400 3085393
USD 47.98
Shop Category
Store Home
Oxygen Sensor
UTV & ATV Brake System Parts
▷  Brake Pads
♢  Kevlar Carbon Brake Pads
♢  Sintered Brake Pads
◈  Brake Shoes
Starter
lift supports
Alternators
Wheel Spacers
leveling lift kit
Towing Mirrors
Wheel hub bearing
Exhaust System Parts
Wheel lug nut
AC Compressor
Radiator
Mass-Air-Flow Sensor
CV axle
Fuel injectors
Cylinder Head Gasket Sets
Cylinder Piston Gasket Sets
Shocks & Struts
Air Suspension
Complete Strut
Brake Rotors & Pads
◈  Brake rotors
◈  Brake Pads
◈  Brake Rotors Pads Kit
Aotomotive Tools
Windshield Wiper Motor
Timing Chain Kits
Timing Belt Kits
Water Pumps
Door Lock Actuator
Oil Pump
Intake Exhaust Valves
Regulator Rectifier
Oil Cooler
Starter Relay
Purge Valve
Parking sensor
Crankshaft Position Sensor
Camshaft Position Sensor
MAP Sensor
Oil Pressure Sensor
Throttle Position Sensor
Stator
Catalytic Converter
idle air control valve
blower motor fan
Secondary Air Injection Pump
Gas can spout
Tire Pressure Gauge
Steering Rack
Vacuum Pump
Spark Plug Ignition Wire
Engine Mount
Pressure Tester Gauge
Wheel Lug
Car Carburetor
Height Level Sensor
Temperature Sensor
Driveshaft
Door handle
Oil Filter Wrench
Oil Fuel Hose Line
4WD Actuator
Throttle Body
Thermostat Housing
Fuel Injector Wiring Harness
Brake pad sensor
Sensor-8
transmission filter
transmission kit
Fuel Pumps
LED Instrument Light
Tire Pressure Sensor
Hydraulic Hand Brake
ATV Brake Caliper
Sun Visor
Bumpers & Parts
Tonneau Cover
Spoiler Wing
Front bumper lip
Cylinder Piston Kit
Coolant Tank
Heater Control Valve
Jeep
Fender Flares
jumper cable
Roof Rack
Window Visor
ATV Tires
Switch Panel
ABS speed sensor
Knock sensor
vehicle speed sensor
Car Cover
Car Floor Mats
Turbocharger
Motorcycle Exhaust Pipe
Pillar Posts
Fuse Holder Box
Rear View Camera
Rear Window Louver Cover
Motorcycle Link Pipe
winch
Headlight Assembly
Clock Spring
Other
Starter For Honda Accord 2.3L 1998-2002 & Acura CL 1998-1999 SM442-03 410-54026
Unit Type: Starter
Voltage: 12
Rotation: CW
Teeth: 9
KW: 1.6
Starter Type: PMGR
Brief: ACURA CL and HONDA ACCORD 1998-00
HONDA ODYSSEY, ISUZU OASIS 1998-99
ACURA: 31200-PAA-A02
ARROWHEAD: SMU0005
CARGO: 113398
HONDA: 31200-PAA-A02, PCB0X
ISUZU: 5862061680
J & N: 410-54026
LESTER: 17729
MITSUBA: SM442-02, SM442-03
NSA: STR-3606
WAI: 2-1940-MT
Please  verify that this is the right part number
you  need
before ordering.
MAKE
TYPE
MODEL
YEAR
ENGINE
ACURA
Auto and Light Truck
CL
1998
2.3L
ACURA
Auto and Light Truck
CL
1999
2.3L
HONDA
Auto and Light Truck
ACCORD
1998
2.3L
HONDA
Auto and Light Truck
ACCORD
1999
2.3L
HONDA
Auto and Light Truck
ACCORD
2000
2.3L
HONDA
Auto and Light Truck
ACCORD
2001
2.3L
HONDA
Auto and Light Truck
ACCORD
2002
2.3L
HONDA
Auto and Light Truck
ODYSSEY
1998
2.3L
ISUZU
Auto and Light Truck
OASIS
1998
2.3L
ISUZU
Auto and Light Truck
OASIS
1999
2.3L
Starter (engine):
A starter (also self-starter, cranking motor, or starter motor) is a device used to rotate (crank) an internal-combustion engine so as to initiate the engine's operation under its own power. Starters can be electric, pneumatic, or hydraulic. In the case of very large engines, the starter can even be another internal-combustion engine.
Internal combustion engines are feedback systems, which, once started, rely on the inertia from each cycle to initiate the next cycle. In a four-stroke engine, the third stroke releases energy from the fuel, powering the fourth (exhaust) stroke and also the first two (intake, compression) strokes of the next cycle, as well as powering the engine's external load. To start the first cycle at the beginning of any particular session, the first two strokes must be powered in some other way than from the engine itself. The starter motor is used for this purpose and it is not required once the engine starts running and its feedback loop becomes self-sustaining.
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. n this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.
Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.
Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2)
.I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3)
.What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4)
.What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5)
.If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
(6)What causes a starter to go bad?
CAUSES OF FAULTY STARTERS: CAUSE OF FAILURE
Electrical connections faulty. Solenoid switch (engaging relay) stiff or faulty. Electric motor damaged electrically. Single-pinion gear, starter pinion or freewheel damaged.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.1.We only accept PayPal.
2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
4.Payment must be received within 10 days as auction ended or order might be delayed.
1. Orders processed within 24 hours of payment verification.
2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
3. The images shown are not the actual item and are for your reference only.
4. Fast shipping:All our packages use USPS First Class/UPS/Fedex.... Package Service
5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.
3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.
4. Return shipping is to be paid by the Buyer.
We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Copyright of Top-liftsupport
. All rights reserved.